| Cutting width | mm 170 ø blade 350 | |
| mm 220 ø blade 400 | ||
| mm 250 ø blade 430 | ||
| Max thicknees display on command board | ||
| Power main (min/max) | kW 55-75-92-110 | |
| Max distance between two saw blades | mm 400 | |
| Blade diam (min/max | ø 350 ÷ ø 430 ø 90 + 2 groove 20 x 6 | |
| Power for saw blade thicknees setting | kW 0.75 | |
| Mechanicaly
saw blade seting Saw blade diameter control on mechanical index |
||
| Feeding carpet width - in | mm 500 | |
| Feeding carpet width - Out | mm 700 | |
| Feeding speed | 0-25 m/1' | |
| Feeding speed display on command board | ||
| Max width --input | mm 800 | |
| Min length --input | mm 700 | |
| Set of pressing rools | 10 pieces, each 1.5 kW | |
| Hydraulic press rolls | 2 befor saw blades 2 after saw blades |
|
| lubrication by autom pumpe (2x)) | ||
| Working height | mm 795 | |
| No of revolution | 3600 obr/min | |
| Pushing power | kW 30 | |
| ventilation - upside | ø 300 mm | |
| ventilation - downside | ø 250 mm | |
| Ventilation Air capacity | 30 m/s | |
| Air consumption | 12900 m3/h | |
| 2 x 2 sleeves | ||
| Weigth | 10000 Kg | |
| Outside dim | cm 3100x2300x2170 |
|